HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 265

graceful-restart timer restart Use graceful-restart timer restart to configure the GR timer. Use undo graceful-restart timer restart to restore the default. Syntax graceful-restart timer restart timer undo graceful-restart timer restart Default The GR timer is 150 seconds. Views BGP view Predefined user roles network-admin Parameters timer: Specifies the GR time in the range of 3 to 600 seconds. Usage guidelines The GR Restarter sends the GR timer to the GR Helper in an Open message. When the GR Helper detects that an active/standby switchover or a BGP restart occurs on the GR Restarter, the GR Helper marks all routes learned from the GR Restarter as stale and starts the GR timer. If no BGP session is established before the GR timer expires, the GR Helper removes the stale routes. Before you configure this command, enable the BGP GR capability. To apply a new GR timer, you must reestablish BGP sessions. Examples # Configure the GR timer as 300 seconds. system-view [Sysname] bgp 100 [Sysname-bgp] graceful-restart [Sysname-bgp] graceful-restart timer restart 300 Related commands • graceful-restart • graceful-restart timer wait-for-rib graceful-restart timer wait-for-rib Use graceful-restart timer wait-for-rib to configure the time to wait for the End-of-RIB marker. Use undo graceful-restart timer wait-for-rib to restore the default. Syntax graceful-restart timer wait-for-rib timer undo graceful-restart timer wait-for-rib 254