HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 234

Views Any view Predefined user roles network-admin network-operator Parameters group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. ipv6-address: Specifies a peer by its IPv6 address. log-info: Displays log information. verbose: Displays detailed information. vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31 characters. If no VPN is specified, the command displays BGP IPv6 unicast peer or peer group information for the public network. Usage guidelines If no parameter is specified, the command displays brief information about all BGP IPv6 unicast peers. The command with the unicast keyword has the same effect as that without the unicast keyword. Examples # Display brief information about all BGP IPv6 unicast peers for the public network. display bgp peer ipv6 BGP local router ID: 192.168.1.135 Local AS number: 100 Total number of peers: 4 Peers in established state: 1 Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State 1::1 3::3 600 9 9 0 0 00:05:12 Established 600 0 0 0 0 00:03:16 Connect Table 54 Command output Field Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State Description IP address of the peer. AS number of the peer. Number of messages received. Number of messages sent. Number of messages to be sent. Number of prefixes received. Lasting time of the current BGP session state. Current state of the BGP session between the local router and the peer. # Display detailed information about BGP IPv6 unicast peer 1::2 for the public network. 223