HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 345
display ripng interface, Table 73, Command output
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 345 highlights
Table 73 Command output Field cost imported RIPng-interface via Description Route metric value. Indicates the route is redistributed from another routing protocol. Route learned from the interface. Next hop IPv6 address. display ripng interface Use display ripng interface to display interface information for a RIPng process. Syntax display ripng process-id interface [ interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator Parameters process-id: Specifies a RIPng process by its ID in the range of 1 to 65535. interface-type interface-number: Specifies an interface by its type and number. If no interface is specified, this command displays information about all interfaces for the RIPng process. Examples # Display interface information for RIPng process 1. display ripng 1 interface Interface: Vlan-interface12 Link-local address: FE80::20C:29FF:FEC8:B4DD Split-horizon: On Poison-reverse: Off MetricIn: 0 MetricOut: 1 Default route: Off Summary address: 1::/16 Table 74 Command output Field Interface Link Local Address Split-horizon Description Name of an interface running RIPng. Link-local address of an interface running RIPng. Indicates whether the split horizon function is enabled: • On-Enabled. • Off-Disabled. 334