HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 118
maximum load-balancing (OSPF view), network (OSPF area view), Predefined user roles, Parameters
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Predefined user roles network-admin Parameters number: Specifies the upper limit of external LSAs in the LSDB, in the range of 1 to 1000000. Examples # Specify the upper limit of external LSAs as 400000. system-view [Sysname] ospf 100 [Sysname-ospf-100] lsdb-overflow-limit 400000 maximum load-balancing (OSPF view) Use maximum load-balancing to specify the maximum number of equal-cost multi-path (ECMP) routes for load balancing. Use undo maximum load-balancing to restore the default. Syntax maximum load-balancing maximum undo maximum load-balancing Views OSPF view Predefined user roles network-admin Parameters maximum: Specifies the maximum number of ECMP routes. Usage guidelines The value range for the maximum argument and the default setting depend on the max-ecmp-num command. If you set the maximum number of ECMP routes to m by using the max-ecmp-num command, the maximum argument in the maximum load-balancing command is in the range of 1 to m and defaults to m. Examples # Specify the maximum number of ECMP routes as 2. system-view [Sysname] ospf 100 [Sysname-ospf-100] maximum load-balancing 2 Related commands max-ecmp-num network (OSPF area view) Use network to enable OSPF on the interface attached to the specified network in the area. 107