HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 43
display rip, Related commands, Syntax, Views, Predefined user roles, Parameters, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
[Sysname] rip 100 [Sysname-rip-100] default-route only cost 2 Related commands rip default-route display rip Use display rip to display state and configuration information for a RIP process. Syntax display rip [ process-id ] Views Any view Predefined user roles network-admin network-operator Parameters process-id: Specifies a RIP process by its ID in the range of 1 to 65535. If no process is specified, the command displays state and configuration information for all RIP processes. Examples # Display current state and configuration information for all RIP processes. display rip Public VPN-instance name: RIP process: 1 RIP version: 1 Preference: 100 Routing policy: abc Fast-reroute: Routing policy: frr Checkzero: Enabled Default cost: 0 Summary: Enabled Host routes: Enabled Maximum number of load balanced routes: 8 Update time : 30 secs Timeout time : Suppress time : 120 secs Garbage-collect time : Update output delay: 20(ms) Output count: 3 Silent interfaces: None Default routes: Originate Default routes cost: 3 Verify-source: Enabled Networks: 1.0.0.0 Configured peers: None Triggered updates sent: 0 180 secs 120 secs 32