HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 173
graceful-restart t1, graceful-restart t2
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
graceful-restart t1 Use graceful-restart t1 to configure the T1 timer. Use undo graceful-restart t1 to restore the default. Syntax graceful-restart t1 seconds count count undo graceful-restart t1 Default The T1 timer is 3 seconds and can expire 10 times. Views IS-IS view Predefined user roles network-admin Parameters seconds: Specifies the T1 timer in the range of 3 to 10 seconds. count: Specifies the number of times that the T1 timer can expire, in the range of 1 to 20. Usage guidelines The T1 timer specifies the number of times that GR Restarter can send a Restart TLV with the RR bit set. After restart, the GR Restarter sends a Restart TLV with the RR bit set to its neighbor. If the restarting router receives a Restart TLV with the RA set from its neighbor before the T1 timer expires, the GR process starts. Otherwise, the GR process fails. Examples # Configure the T1 timer of IS-IS process 1 as 5 seconds, and the expiration times as 5. system-view [Sysname] isis 1 [Sysname-isis-1] graceful-restart t1 5 count 5 Related commands • graceful-restart • graceful-restart t2 • graceful-restart t3 graceful-restart t2 Use graceful-restart t2 to configure the T2 timer. Use undo graceful-restart t2 to restore the default. Syntax graceful-restart t2 seconds undo graceful-restart t2 162