HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 442
if-match interface, if-match local-preference, Default
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 442 highlights
• ip extcommunity-list if-match interface Use if-match interface to match routes having the specified output interface. Use undo if-match interface to remove the configuration. Syntax if-match interface { interface-type interface-number }& undo if-match interface [ interface-type interface-number ]& Default No match criterion is configured. Views Routing policy node view Predefined user roles network-admin Parameters interface-type interface-number: Specifies an interface by its type and number. &: Indicates that the argument before it can be entered up to 16 times. Usage guidelines BGP does not support criteria for matching against the output interface of routing information. Examples # Configure node 10 in permit mode for routing policy policy1 to permit routes with the output interface VLAN-interface 1. system-view [Sysname] route-policy policy1 permit node 10 [Sysname-route-policy-policy1-10] if-match interface vlan-interface 1 if-match local-preference Use if-match local-preference to match BGP routes having the specified local preference. Use undo if-match local-preference to restore the default. Syntax if-match local-preference preference undo if-match local-preference Default No local preference match criterion is configured. Views Routing policy node view 431