HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 414
ipv6 import-route isisv6 level-1 into level-2
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 414 highlights
Usage guidelines IPv6 IS-IS considers redistributed routes as AS-external routes. You can specify a cost and a level for redistributed routes. The import-route bgp4+ command redistributes only EBGP routes. The import-route bgp4+ allow-ibgp command redistributes both EBGP and IBGP routes, and might cause routing loops. Therefore, use it with caution. Examples # Configure IPv6-IS-IS to redistribute static routes and set the cost for redistributed routes to 15. system-view [Sysname] isis 1 [Sysname-isis-1] ipv6 import-route static cost 15 ipv6 import-route isisv6 level-1 into level-2 Use ipv6 import-route isisv6 level-1 into level-2 to enable route advertisement from Level-1 to Level-2. Use undo ipv6 import-route isisv6 level-1 into level-2 to restore the default. Syntax ipv6 import-route isisv6 level-1 into level-2 [ filter-policy { acl6-number | prefix-list prefix-list-name | route-policy route-policy-name } | tag tag ] * undo ipv6 import-route isisv6 level-1 into level-2 Default Route advertisement from Level-1 to Level-2 is enabled. Views IS-IS view Predefined user roles network-admin Parameters filter-policy: Specifies a filtering policy. acl6-number: Specifies an IPv6 ACL by its number in the range of 2000 to 3999. prefix-list prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63 characters. route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters. tag tag: Specifies an administrative tag for marking redistributed routes, in the range of 1 to 4294967295. Usage guidelines This command enables a Level-1-2 router to redistribute Level-1 routes to Level-2 routers and Level-1-2 routers in the local area. Examples # Enable route advertisement from Level-1 to Level-2. 403