HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 255

Field From Relay Nexthop Description IP address of BGP peer that advertised the route. Next hop found by route recursion. If no next hop is found, this field displays not resolved. # Display advertisement information about BGP IPv6 unicast routes destined to network 2::/64 for the public network. display bgp routing-table ipv6 2:: 64 advertise-info BGP local router ID: 192.168.1.136 Local AS number: 100 Paths: 1 best BGP routing table information of 2::/64: Advertised to peers (1 in total): 1::2 Table 67 Command output Field Paths BGP routing table information of 2::/64 Advertised to peers (2 in total) Description Number of optimal routes destined to the specified network. Advertisement information of BGP routes destined to network 2::/64. Peers to which the route has been advertised, and the number of peers. display bgp routing-table ipv6 unicast as-path-acl Use display bgp routing-table ipv6 unicast as-path-acl to display BGP IPv6 unicast routes permitted by an AS path list. Syntax display bgp routing-table ipv6 [ unicast ] [ vpn-instance vpn-instance-name ] as-path-acl as-path-acl-number Views Any view Predefined user roles network-admin network-operator Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31 characters. If no VPN is specified, the command displays BGP IPv6 unicast routes permitted by an AS path list for the public network. as-path-acl-number: Specifies an AS path list by its number in the range of 1 to 256. 244