HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 343
display ripng, Predefined user roles, Parameters, Usage guidelines, Examples, Related commands, Syntax
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 343 highlights
Predefined user roles network-admin Parameters value: Specifies a default metric for redistributed routes, in the range of 0 to 16. Usage guidelines When you use the import-route command to redistribute routes from another routing protocol without specifying a metric, the metric specified by the default cost command applies. Examples # Configure a default metric of 2 for redistributed routes. system-view [Sysname] ripng 100 [Sysname-ripng-100] default cost 2 Related commands import-route display ripng Use display ripng to display state and configuration information for a RIPng process. Syntax display ripng [ process-id ] Views Any view Predefined user roles network-admin network-operator Parameters process-id: Specifies a RIPng process by its ID in the range of 1 to 65535. If no process is specified, this command displays information about all RIPng processes. Examples # Display state and configuration information for all configured RIPng processes. display ripng Public VPN-instance name: RIPng process: 1 Preference: 100 Routing policy: abc Checkzero: Enabled Default cost: 0 Maximum number of load balanced routes: 6 Update time : 30 secs Timeout time : Suppress time : 120 secs Garbage-collect time : Number of periodic updates sent: 256 180 secs 120 secs 332