HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 321
reset bgp all, reset bgp dampening ipv4 unicast, Related commands, Syntax, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 321 highlights
Related commands • peer capability-advertise route-refresh • peer keep-all-routes reset bgp all Use reset bgp all to reset all BGP sessions. Syntax reset bgp all Views User view Predefined user roles network-admin Usage guidelines To validate a new route selection policy, use this command to reset BGP sessions. BGP re-establishes the BGP sessions, advertises routes, and applies the new policy to routes. This operation breaks down BGP sessions for a short while. Examples # Reset all BGP sessions. reset bgp all reset bgp dampening ipv4 unicast Use reset bgp dampening ipv4 unicast to clear BGP IPv4 unicast route dampening information and release the suppressed BGP IPv4 unicast routes. Syntax reset bgp dampening ipv4 [ unicast ] [ vpn-instance vpn-instance-name ] [ network-address [ mask | mask-length ] ] Views User view Predefined user roles network-admin Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31 characters. If no VPN is specified, this command clears BGP IPv4 unicast route dampening information for the public network, and releases the suppressed BGP IPv4 unicast routes. network-address: Specifies a destination network address. mask: Specifies a network mask, in dotted decimal notation. mask-length: Specifies a mask length in the range of 0 to 32. 310