HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 250
display bgp routing-table ipv4 unicast peer
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
display bgp routing-table ipv4 unicast peer Use display bgp routing-table ipv4 unicast peer to display BGP IPv4 unicast routing information advertised to or received from the specified BGP peer. Syntax display bgp routing-table ipv4 [ unicast ] [ vpn-instance vpn-instance-name ] peer ip-address { advertised-routes | received-routes } [ network-address [ mask | mask-length ] | statistics ] Views Any view Predefined user roles network-admin network-operator Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31 characters. If no VPN is specified, the command displays BGP IPv4 unicast routing information advertised to or received from the specified BGP peer for the public network. ip-address: Specifies a peer by its IP address. advertised-routes: Displays routing information advertised to the specified peer. received-routes: Displays routing information received from the specified peer. network-address: Specifies the IP address of the destination network. mask: Specifies the mask of the destination network, in dotted decimal notation. mask-length: Specifies a mask length in the range of 0 to 32. statistics: Displays route statistics. Usage guidelines • If the network-address, mask, and mask-length arguments are not specified, the command displays all BGP IPv4 unicast routing information advertised to or received from the specified BGP peer. • If only the network-address argument is specified, the system ANDs the network address with the mask of a route. If the result matches the network address of the route, the command displays information about the route. • If the network-address mask or network-address mask-length argument is specified, the command displays information about the route that matches both the specified destination network address and the mask (or mask length). The command with the unicast keyword has the same effect as that without the unicast keyword. Examples # Display all BGP IPv4 unicast routing information advertised to BGP peer 10.2.1.2 for the public network. display bgp routing-table ipv4 peer 10.2.1.2 advertised-routes Total number of routes: 2 BGP local router ID is 192.168.100.1 239