HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 427
Routing policy configuration commands, apply as-path, apply comm-list delete
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 427 highlights
Routing policy configuration commands Common routing policy configuration commands apply as-path Use apply as-path to set the AS_PATH attribute for BGP routes. Use undo apply as-path to restore the default. Syntax apply as-path as-number& [ replace ] undo apply as-path Default No AS_PATH attribute is set. Views Routing policy node view Predefined user roles network-admin Parameters as-number&: Specifies an AS by its number in the range of 1 to 4294967295. & indicates that the argument before it can be entered up to 32 times. replace: Replaces the original AS numbers. If this keyword is not specified, the command adds the specified AS numbers before the original AS_PATH attribute. Examples # Configure node 10 in permit mode for routing policy policy1 to add AS number 200 before the original AS_PATH attribute of BGP routes matching AS path list 1. system-view [Sysname] route-policy policy1 permit node 10 [Sysname-route-policy-policy1-10] if-match as-path 1 [Sysname-route-policy-policy1-10] apply as-path 200 Related commands • display ip as-path • if-match ip as-path • ip as-path apply comm-list delete Use apply comm-list delete to delete the COMMUNITY attributes from BGP routes. 416