HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 136
silent-interface (OSPF view), snmp-agent trap enable ospf, Examples, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Examples # Configure a global router ID as 1.1.1.1. system-view [Sysname] router id 1.1.1.1 silent-interface (OSPF view) Use silent-interface to disable an interface or all interfaces from receiving and sending OSPF packets. Use undo silent-interface to remove the configuration. Syntax silent-interface { interface-type interface-number | all } undo silent-interface { interface-type interface-number | all } Default An interface can receive and send OSPF packets. Views OSPF view Predefined user roles network-admin Parameters interface-type interface-number: Specifies an interface by its type and number. all: Specifies all interfaces. Usage guidelines A disabled interface is a passive interface that cannot receive or send any hello packets. To disable a network from receiving and sending OSPF routes, issue the command on the interface connected to the network. Examples # Disable VLAN-interface 10 from receiving and sending OSPF packets. system-view [Sysname] ospf 100 [Sysname-ospf-100] silent-interface vlan-interface 10 snmp-agent trap enable ospf Use snmp-agent trap enable ospf to enable the sending of SNMP traps for a specific OSPF process. Use undo snmp-agent trap enable ospf to disable the feature. Syntax snmp-agent trap enable ospf [ authentication-failure | bad-packet | config-error | grhelper-status-change | grrestarter-status-change | if-state-change | lsa-maxage | lsa-originate | lsdb-approaching-overflow | lsdb-overflow | neighbor-state-change | nssatranslator-status-change | retransmit | virt-authentication-failure | virt-bad-packet | virt-config-error | virt-retransmit | virtgrhelper-status-change | virtif-state-change | virtneighbor-state-change ] * 125