HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 430
apply cost-type
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 430 highlights
Parameters +: Increases a cost value. -: Decreases a cost value. value: Specifies a cost in the range of 0 to 4294967295. Examples # Configure node 10 in permit mode for routing policy policy1 to set a cost of 120 for OSPF external routes. system-view [Sysname] route-policy policy1 permit node 10 [Sysname-route-policy-policy1-10] if-match route-type external-type1or2 [Sysname-route-policy-policy1-10] apply cost 120 apply cost-type Use apply cost-type to set a cost type for routing information. Use undo apply cost-type to restore the default. Syntax apply cost-type { external | internal | type-1 | type-2 } undo apply cost-type Default No cost type is set for routing information. Views Routing policy node view Predefined user roles network-admin Parameters external: Sets the cost type to IS-IS external route. internal: Sets the cost type to IS-IS internal route, or sets the MED value for a matching BGP route to the IGP metric of the route's next hop. type-1: Sets the cost type to OSPF Type-1 external route. type-2: Sets the cost type to OSPF Type-2 external route. Usage guidelines Used for IS-IS, the apply cost-type internal command sets the cost type for a matching IS-IS route to IS-IS internal route. Used for BGP, the apply cost-type internal command sets the MED for a matching BGP route learned from an IBGP peer to the IGP metric of the route's next hop before BGP advertises the route to an EBGP peer. Examples # Configure node 10 in permit mode for routing policy policy1 to set the cost type for routes that have a tag of 8 to IS-IS internal route. 419