HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 390
maximum load-balancing (OSPFv3 view), ospfv3
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 390 highlights
[Sysname-ospfv3-100] lsa-generation-interval 2 100 100 Related commands lsa-arrival-interval maximum load-balancing (OSPFv3 view) Use maximum load-balancing to configure the maximum number of equal-cost multi-path (ECMP) routes. Use undo maximum load-balancing to restore the default. Syntax maximum load-balancing maximum undo maximum load-balancing Views OSPFv3 view Predefined user roles network-admin Parameters maximum: Specifies the maximum number of ECMP routes. When the maximum number is 1, OSPFv3 does not perform load balancing. Usage guidelines The value range for the maximum argument and the default setting depend on the max-ecmp-num command. If you set the maximum number of ECMP routes to m by using the max-ecmp-num command, the maximum argument in the maximum load-balancing command is in the range of 1 to m and defaults to m. Examples # Configure the maximum number of ECMP routes as 2. system-view [Sysname] ospfv3 100 [Sysname-ospfv3-100] maximum load-balancing 2 Related commands max-ecmp-num ospfv3 Use ospfv3 to enable an OSPFv3 process and enter OSPFv3 view. Use undo ospfv3 to disable an OSPFv3 process. Syntax ospfv3 [ process-id | vpn-instance vpn-instance-name ] * undo ospfv3 [ process-id ] 379