HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 283
peer bfd, to enable BFD for the link to a BGP peer.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
import: Filters incoming routes. Usage guidelines The specified AS path list must have been created with the ip as-path command in system view. Otherwise, all routes can pass the AS path list. Examples # In BGP IPv4 unicast instance view, specify the AS path list 1 to filter routes outgoing to the peer group test. system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family unicast [Sysname-bgp-ipv4] peer test as-path-acl 1 export # In BGP-VPN IPv4 unicast instance view, specify the AS path list 1 to filter routes outgoing to the peer group test. system-view [Sysname] bgp 100 [Sysname-bgp] ip vpn-instance vpn1 [Sysname-bgp-vpn1] ipv4-family unicast [Sysname-bgp-ipv4-vpn1] peer test as-path-acl 1 export # In BGP IPv6 unicast instance view, specify the AS path list 1 to filter routes outgoing to the peer group test. system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family unicast [Sysname-bgp-ipv6] peer test as-path-acl 1 export Related commands • filter-policy export • filter-policy import • ip as-path • peer filter-policy • peer prefix-list • peer route-policy peer bfd Use peer bfd to enable BFD for the link to a BGP peer. Use undo peer bfd to restore the default. Syntax peer { ip-address | ipv6-address } bfd undo peer { ip-address | ipv6-address } bfd Default BFD is disabled. 272