HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 171
flash-flood, graceful-restart
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
flash-flood Use flash-flood to enable IS-IS LSP flash flooding. Use undo flash-flood to disable IS-IS LSP flash flooding. Syntax flash-flood [ flood-count flooding-count | max-timer-interval flooding-interval | [ level-1 | level-2 ] ] * undo flash-flood [ level-1 | level-2 ] Default IS-IS LSP flash flooding is disabled. Views IS-IS view Predefined user roles network-admin Parameters flood-count flooding-count: Specifies the maximum number of LSPs to be flooded before the next SPF calculation, in the range of 1 to 15. The default is 5. max-timer-interval flooding-interval: Specifies the delay of the flash flooding, in the range of 10 to 50000 milliseconds. The default is 10. level-1: Enables flash flooding for level-1. level-2: Enables flash flooding for level-2. Usage guidelines If no level is specified, the command enables IS-IS LSP flash flooding for both Level-1 and Level-2. Examples # Enable fast flooding and specify the maximum LSPs to be sent as 10 and the delay time as 100 milliseconds. system-view [Sysname] isis 1 [Sysname-isis-1] flash-flood flood-count 10 max-timer-interval 100 graceful-restart Use graceful-restart to enable IS-IS GR. Use undo graceful-restart to disable IS-IS GR. Syntax graceful-restart undo graceful-restart Default IS-IS GR is disabled. 160