HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 196
maximum load-balancing (IS-IS view), network-entity
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Predefined user roles network-admin Parameters size: Specifies the maximum size of received LSPs, in the range of 512 to 16384 bytes. Examples # Configure the maximum size of received LSPs. system-view [Sysname] isis 1 [Sysname-isis-1] lsp-length receive 1024 maximum load-balancing (IS-IS view) Use maximum load-balancing to configure the maximum number of equal-cost multi-path (ECMP) routes for load balancing. Use undo maximum load-balancing to restore the default. Syntax maximum load-balancing number undo maximum load-balancing Views IS-IS view Predefined user roles network-admin Parameters number: Specifies the maximum number of ECMP routes. Usage guidelines The value range for the number argument and the default setting depend on the max-ecmp-num command. If you set the maximum number of ECMP routes to m by using the max-ecmp-num command, the number argument in the maximum load-balancing command is in the range of 1 to m and defaults to m. Examples # Configure the maximum number of ECMP routes as 2. system-view [Sysname] isis 100 [Sysname-isis-100] maximum load-balancing 2 Related commands max-ecmp-num network-entity Use network-entity to configure the Network Entity Title (NET) for an IS-IS process. 185