HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 260

Examples # Display statistics of BGP IPv6 unicast routes. display bgp routing-table ipv6 statistics Total number of routes: 4 ebgp-interface-sensitive Use ebgp-interface-sensitive to enable quick reestablishment of direct EBGP sessions. Use undo ebgp-interface-sensitive to disable the function. Syntax ebgp-interface-sensitive undo ebgp-interface-sensitive Default Quick reestablishment of direct EBGP sessions is enabled. Views BGP view Predefined user roles network-admin Usage guidelines This command enables BGP to quickly handle direct EBGP link failures. When a direct link to an EBGP peer fails, BGP tears down the session and reestablishes a session to the peer immediately. If the function is not enabled, the router does not tear down the session until the holdtime expires. However, disabling this function can prevent routing flaps from affecting EBGP session state. This command applies to only direct EBGP sessions. Examples # Enable quick reestablishment of direct EBGP sessions. system-view [Sysname] bgp 100 [Sysname-bgp] ebgp-interface-sensitive filter-policy export Use filter-policy export to filter outbound routes by using a specified filter. Use undo filter-policy export to cancel filtering of outbound routes. Syntax In BGP IPv4 unicast instance view/BGP-VPN IPv4 unicast instance view: filter-policy { acl-number | prefix-list prefix-list-name } export [ protocol process-id ] undo filter-policy { acl-number | prefix-list prefix-list-name } export [ protocol process-id ] In BGP IPv6 unicast instance view/BGP-VPN IPv6 unicast instance view: 249