HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 81
Predefined user roles, Parameters, Usage guidelines, Examples, If no OSPF process is specified
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Predefined user roles network-admin network-operator Parameters process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Usage guidelines If no OSPF process is specified, this command displays brief information about all OSPF processes. Examples # Display OSPF brief information. display ospf brief OSPF Process 1 with Router ID 192.168.1.2 OSPF Protocol Information RouterID: 192.168.1.2 Router Type: NSSA Route Tag: 0 Multi-VPN-Instance is not enabled Opaque capable ISPF is enabled SPF-schedule-interval: 5 50 200 LSA generation interval: 5 LSA arrival interval: 1000 Transmit pacing: Interval: 20 Count: 3 Default ASE parameters: Metric: 1 Tag: 1 Type: 2 Route Preference: 10 ASE Route Preference: 150 SPF Computation Count: 22 RFC 1583 Compatible Graceful restart interval: 120 This process is currently bound to MIB Area Count: 1 Nssa Area Count: 1 ExChange/Loading Neighbors: 0 SNMP trap rate limit interval: 2 Count: 300 Area: 0.0.0.1 (MPLS TE not enabled) Authtype: None Area flag: NSSA 7/5 translator state: Disabled 7/5 translate stability timer interval: 0 SPF Scheduled Count: 5 ExChange/Loading Neighbors: 0 Interface: 192.168.1.2 (Vlan-interface1) Cost: 1 State: DR Type: Broadcast Priority: 1 Designated Router: 192.168.1.2 Backup Designated Router: 192.168.1.1 70 MTU: 1500