HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 179
isis, System view
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Predefined user roles network-admin Parameters number: Specifies the maximum number of redistributed Level 1/Level 2 IPv4 routes, in the range of 1 to 16384. Examples # Configure IS-IS process 1 to redistribute up to 1000 Level 1/Level 2 IPv4 routes. system-view [Sysname] isis 1 [Sysname-isis-1] import-route limit 1000 Related commands import-route isis Use isis to enable an IS-IS process and enter IS-IS view. Use undo isis to disable an IS-IS process. Syntax isis [ process-id ] [ vpn-instance vpn-instance-name ] undo isis [ process-id ] Default The system does not run any IS-IS process. Views System view Predefined user roles network-admin Parameters process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. The default is 1. vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If no VPN is specified, the IS-IS process runs on the public network. Examples # Enable IS-IS process 1 and specify the system ID as 0000.0000.0002 and area ID as 01.0001. system-view [Sysname] isis 1 [Sysname-isis-1] network-entity 01.0001.0000.0000.0002.00 Related commands • isis enable • network-entity 168