HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 400

Use undo preference to restore the default. Syntax preference [ ase ] [ route-policy route-policy-name ] preference undo preference [ ase ] Default The preference for OSPFv3 internal routes is 10, and that for OSPFv3 external routes is 150. Views OSPFv3 view Predefined user roles network-admin Parameters ase: Sets a preference to OSPFv3 external routes. If the keyword is not specified, the command sets a preference for OSPFv3 internal routes. route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters, to set a preference for matching routes. preference: Specifies the preference of OSPFv3, in the range of 1 to 255. The smaller the value, the higher the preference. Usage guidelines If multiple routing protocols find multiple routes to the same destination, the router uses the route found by the protocol with the highest preference. Examples # Set a preference of 150 for OSPFv3 routes. system-view [Sysname] OSPFv3 [Sysname-OSPFv3-1] preference 150 silent-interface(OSPFv3 view) Use silent-interface to disable the specified interface from receiving and sending OSPFv3 packets. Use undo silent-interface to restore the default. Syntax silent-interface { interface-type interface-number | all } undo silent-interface { interface-type interface-number | all } Default An interface can receive and send OSPFv3 packets. Views OSPFv3 view Predefined user roles network-admin 389