HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 302

In BGP IPv6 unicast instance view: peer { group-name | ipv6-address } next-hop-local undo peer { group-name | ipv6-address } next-hop-local Default Views The router sets itself as the next hop for routes sent to an EBGP peer or peer group, but does not set itself as the next hop for routes sent to an IBGP peer or peer group. BGP IPv4 unicast instance view, BGP-VPN IPv4 unicast instance view, BGP IPv6 unicast instance view Predefined user roles network-admin Parameters group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer group must have been created. ip-address: Specifies a peer by its IP address. The peer must have been created. ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created. Usage guidelines To make sure that an IBGP peer can find the next hop, you can use this command to specify the router as the next hop for routes sent to the IBGP peer. Examples # In BGP IPv4 unicast instance view, specify the router as the next hop for routes sent to peer group test. system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family unicast [Sysname-bgp-ipv4] peer test next-hop-local # In BGP-VPN IPv4 unicast instance view, specify the router as the next hop for routes sent to peer group test. system-view [Sysname] bgp 100 [Sysname-bgp] ip vpn-instance vpn1 [Sysname-bgp-vpn1] ipv4-family unicast [Sysname-bgp-ipv4-vpn1] peer test next-hop-local # In BGP IPv6 unicast instance view, specify the router as the next hop for routes sent to peer group test. system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family unicast [Sysname-bgp-ipv6] peer test next-hop-local peer password Use peer password to configure MD5 authentication for a peer or peer group. Use undo peer password to remove the MD5 configuration for a peer or peer group. 291