HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 453
reset ip prefix-list, IPv6 routing policy configuration commands, apply ipv6 next-hop
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 453 highlights
If both ip-address and mask-length are specified as 0.0.0.0 0, only the default route will be matched. To match all routes, use 0.0.0.0 0 less-equal 32. Examples # Configure IP prefix list p1 to permit routes destined for network 10.0.0.0/8 and with mask length 17 or 18. system-view [Sysname] ip prefix-list p1 permit 10.0.0.0 8 greater-equal 17 less-equal 18 Related commands • display ip prefix-list • reset ip prefix-list reset ip prefix-list Use reset ip prefix-list to clear IPv4 prefix list statistics. Syntax reset ip prefix-list [ prefix-list-name ] Views User view Predefined user roles network-admin Parameters prefix-list-name: Specifies an IP prefix list by its name, a case-sensitive string of 1 to 63 characters. Without this argument, this command clears statistics for all IPv4 prefix lists. Examples # Clear the statistics for IPv4 prefix list abc. reset ip prefix-list abc Related commands • display ip prefix-list • ip prefix-list IPv6 routing policy configuration commands apply ipv6 next-hop Use apply ipv6 next-hop to set a next hop for IPv6 routes. Use undo apply ipv6 next-hop to restore the default. Syntax apply ipv6 next-hop ipv6-address undo apply ipv6 next-hop 442