HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 208
Keywords, Function, con BGP to not summarize route 1.1.1.0/24.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Table 44 Functions of the keywords Keywords as-set attribute-policy detail-suppressed origin-policy suppress-policy Function Enables the summary route to carry the AS path information of all summarized routes. This feature can help avoid routing loops. However, if many routes are summarized and are changed frequently, do not specify this keyword because this configuration causes the summary route to flap with the more specific routes. Sets attributes except the AS-PATH attribute for the summary route. The peer route-policy command can achieve the same purpose. Disables advertisement of all more specific routes. To disable advertisement of some more specific routes, use the suppress-policy keyword or the peer filter-policy command. Summarizes only routes satisfying a routing policy. If the destination address of a route falls within the summary network but does not match the routing policy, the route is not summarized, and is not controlled by the detail-suppressed and suppress-policy keywords. There is no need to configure apply clauses for the routing policy referenced by the origin-policy keyword because they do not take effect. Disables advertisement of some more specific routes filtered by a routing policy. The routing policy uses if-match clauses to filter routes. There is no need to configure apply clauses for the routing policy referenced by the suppress-policy keyword because they do not take effect. Examples # In BGP IPv4 unicast instance view, create a summary route 1.1.0.0/16 in the BGP routing table. system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family unicast [Sysname-bgp-ipv4] aggregate 1.1.0.0 255.255.0.0 # In BGP IPv4 unicast instance view, create a summary route 1.1.0.0/16 in the BGP routing table. Specify the AS_PATH attribute for the summary route to contain the AS path information of all summarized routes, and advertise only the summary route. system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family unicast [Sysname-bgp-ipv4] aggregate 1.1.0.0 255.255.0.0 as-set detail-suppressed # In BGP IPv4 unicast instance view, create a summary route 1.1.0.0/16 in the BGP routing table, and set the COMMUNITY attribute of the summary route to INTERNET. system-view [Sysname] route-policy commu permit node 0 [Sysname-route-policy-commu-0] apply community internet [Sysname-route-policy-commu-0] quit [Sysname] bgp 100 [Sysname-bgp] ipv4-family unicast [Sysname-bgp-ipv4] aggregate 1.1.0.0 255.255.0.0 attribute-policy commu # In BGP IPv4 unicast instance view, create a summary route 1.1.0.0/16 in the BGP routing table, and configure BGP to not summarize route 1.1.1.0/24. 197