HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 128

[Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospf network-type nbma Related commands ospf dr-priority ospf timer dead Use ospf timer dead to set the neighbor dead interval. Use undo ospf timer dead to restore the default. Syntax ospf timer dead seconds undo ospf timer dead Default The dead interval is 40 seconds for broadcast and P2P interfaces. The dead interval is 120 seconds for P2MP and NBMA interfaces. Views Interface view Predefined user roles network-admin Parameters seconds: Specifies the dead interval in the range of 1 to 2147483647 seconds. Usage guidelines If an interface receives no hello packet from a neighbor within the dead interval, the interface considers the neighbor down. The dead interval on an interface is at least four times the hello interval. Routers attached to the same segment must have the same dead interval. Examples # Configure the dead interval for VLAN-interface 10 as 60 seconds. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospf timer dead 60 Related commands ospf timer hello ospf timer hello Use ospf timer hello to set the hello interval on an interface. Use undo ospf timer hello to restore the default. Syntax ospf timer hello seconds undo ospf timer hello 117