HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 285
The multi-protocol extension function enables BGP to advertise and receive routing information
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
Syntax peer { group-name | ip-address | ipv6-address } capability-advertise conventional undo peer { group-name | ip-address | ipv6-address } capability-advertise conventional Default BGP multi-protocol extension and route refresh are enabled. Views BGP view, BGP-VPN instance view Predefined user roles network-admin Parameters group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer group must have been created. ip-address: Specifies a peer by its IP address. The peer must have been created. ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created. Usage guidelines The route refresh function enables BGP to send and receive Route-refresh messages and implement BGP session soft-reset. The multi-protocol extension function enables BGP to advertise and receive routing information for various protocols (for example, IPv6 routing information). If both the peer capability-advertise conventional and peer capability-advertise route-refresh commands are executed, the last configuration takes effect. Examples # In BGP view, disable multi-protocol extension and route refresh for peer 1.1.1.1. system-view [Sysname] bgp 100 [Sysname-bgp] peer 1.1.1.1 as-number 100 [Sysname-bgp] peer 1.1.1.1 capability-advertise conventional # In BGP-VPN instance view, disable multi-protocol extension and route refresh for peer 1::1. system-view [Sysname] bgp 100 [Sysname-bgp] ip vpn-instance vpn1 [Sysname-bgp-vpn1] peer 1::1 as-number 100 [Sysname-bgp-vpn1] peer 1::1 capability-advertise conventional Related commands • display bgp peer ipv4 unicast • display bgp peer ipv6 unicast • peer capability-advertise route-refresh 274