HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 157
display isis name-table
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Field SOURCE NLPID AREA ADDR INTF ADDR INTF ADDR V6 NBR ID IP-Internal IP-External IP-Extended COST Auth IPV6 IPV6-Ext Description System ID of the originating router. Network layer protocol the originating router runs. Area address of the originating router. IP address of the originating router's IS-IS interface. IPv6 address of the originating router's IS-ISv6 interface. Neighbor ID of the originating router. Internal IP address and mask of the originating router. External IP address and mask of the originating router. Extended IP address and mask of the originating router. Cost. Authentication information of the originating router. Internal IPv6 address and prefix of the originating router. External IPv6 address and prefix of the originating router. display isis name-table Use display isis name-table to display the host name to system ID mapping table. Syntax display isis name-table [ process-id ] Views Any view Predefined user roles network-admin network-operator Parameters process-id: Displays the host name to system ID mapping table for an IS-IS process specified by its ID in the range of 1 to 65535. Examples # Configure a name RUTA for the local IS system. system-view [Sysname] isis 1 [Sysname-isis-1] is-name RUTA # Map the host name RUTB to the system ID 0000.0000.0041 of a remote IS. [Sysname-isis-1] is-name map 0000.0000.0041 RUTB # Display the IS-IS host name to system ID mapping table. [Sysname-isis-1] display isis name-table Name table information for ISIS(1) 146