HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 227
display bgp network, Table 48, Command output
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Members: Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State 3::3 600 0 0 0 0 00:00:40 Established Table 48 Command output Field BGP peer group Remote AS Type Maximum number of prefixes allowed Threshold Configured hold time Keepalive time Minimum time between advertisements Peer preferred value Routing policy configured Members Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State Description Name of the BGP peer group. AS number of the peer group. Type of the peer groups: • external-IBGP peer group. • internal-EBGP peer group. Maximum number of routes allowed to learn from the peer. Percentage of received routes from the peer to maximum routes allowed to learn from the peer. If the percentage is reached, the system generates alarm messages. Configured Hold Interval in seconds. Keepalive interval in seconds. Minimum route advertisement interval in seconds. Preferred value specified for the routes from the peer. Routing policy configured for the peer group. If no routing policy is specified, this field displays No routing policy is configured. Information of the peers included in the peer group. IPv6 address of the peer. AS number of the peer. Number of messages received. Number of messages sent. Number of messages to be sent. Number of prefixes received. Lasting time of the current BGP session state. Current state of the BGP session between the local router and the peer. display bgp network Use display bgp network to display information about routes advertised by the network command and shortcut routes configured by the network short-cut command. 216