HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 407
Table 92, Command output, If no level is specified
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 407 highlights
Usage guidelines If no level is specified, this command displays both Level-1 and Level-2 route information. Examples # Display IPv6 IS-IS route information. display isis route ipv6 Route information for IS-IS(1 Level-1 IPv6 Forwarding Table Destination: 2001:1:: Flag : R/L/- Next Hop : FE80::200:5EFF:FE64:8905 PrefixLen: 64 Cost : 20 Interface: Vlan1 Destination: 2001:2:: Flag : D/L/- Next Hop : Direct PrefixLen: 64 Cost : 10 Interface: Vlan1 Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set Level-2 IPv6 Forwarding Table Destination: 2001:1:: Flag : -/-/- PrefixLen: 64 Cost : 20 Destination: 2001:2:: Flag : D/L/- Next Hop : Direct PrefixLen: 64 Cost : 10 Interface: Vlan1 Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set Table 92 Command output Field Destination PrefixLen Flag/Flags Cost Description IPv6 destination prefix. Length of the prefix. Route flag: • D-This is a direct route. • R-The route has been added into the routing table. • L-The route has been advertised in an LSP. • U-Route leaking flag, indicating that the Level-1 route is from Level-2. U means the route will not be returned to Level-2. Route cost. 396