HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 70
version
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
system-view [Sysname-rip] rip 100 [Sysname-rip-100] undo validate-source-address version Use version to specify a global RIP version. Use undo version to restore the default. Syntax version { 1 | 2 } undo version Default Views No global RIP version is configured. An RIP interface can send RIPv1 broadcasts and receive RIPv1 broadcasts and unicasts, and RIPv2 broadcasts, multicasts, and unicasts. RIP view Predefined user roles network-admin Parameters 1: Specifies the RIP version as RIPv1. 2: Specifies the RIP version as RIPv2. RIPv2 messages are multicast. Usage guidelines An interface prefers the RIP version configured on it over the global RIP version. If no RIP version is specified for the interface and the global version is RIPv1, the interface uses RIPv1, and it can send RIPv1 broadcasts, and receive RIPv1 broadcasts and unicasts. If no RIP version is specified for the interface and the global version is RIPv2, the interface uses RIPv2 multicast mode, and it can send RIPv2 multicasts, and receive RIPv2 broadcasts, multicasts, and unicasts. Examples # Specify the global RIP version as RIPv2. system-view [Sysname] rip 100 [Sysname-rip-100] version 2 Related commands rip version 59