HP DesignJet T850 DesignJet T850 Printer Series DesignJet T950 Printer SeriesU - Page 37
Unload a single sheet, Paper, Sheet loaded, Unload
View all HP DesignJet T850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
5. When prompted by the control panel, insert the sheet into the right-hand side of the input slot. WARNING! Do not push your fingers inside the printer's paper path. 6. Align the sheet with the line. 7. Guide the sheet into the printer; this is especially important with thicker papers. 8. The printer checks the alignment and measures the sheet. NOTE: Depending on the width of the sheet, it feeds out the front of the printer. 9. If the sheet is not correctly aligned, you may be asked to reload it. NOTE: If you have an unexpected problem at any stage of the paper loading process, see Paper cannot be loaded successfully on page 102. Unload a single sheet Sheets are unloaded from the front of the printer. 1. To unload a sheet, go to the control panel and tap the Paper icon , then Sheet loaded > Unload. 2. Either catch the sheet manually or allow it to fall into the bin. NOTE: If you don't load a new sheet, the tray is the default active paper source. 28 Chapter 4 Paper handling