HP 3100 HP LaserJet 3100 - Product User's Guide, C3948-90970 - Page 104

Printing tasks With the HP LaserJet 3100 product you can manually duplex print and stop a print job. CAUTION Stopping a print job There are two ways you can stop a print job: q If your print job has not started to print, you can cancel it from the Print Manager in Windows 3.1x or from the print spooler in Windows 95. q If your print job is currently printing, press STOP on the control panel and hold it for five seconds. If a fax job currently is being transmitted or received, this procedure will also clear it. Printing on both sides (duplexing) When you print on both sides of a sheet, there will be a difference in the way the HP LaserJet 3100 product performs. When printing on the second side, you may experience some difficulties such as sheets feeding into the HP LaserJet 3100 product incorrectly or multiple feeds. In addition, the print quality will probably be reduced on the second side of the sheet. Because duplexing involves sending already printed pages through the HP LaserJet 3100 product, frequent duplexing may cause reduced output quality for all printed pages. If this occurs, clean the print path. See "Using a cleaning page" in chapter 9. Hint Another solution to saving paper without duplexing is to use the N-up feature in the program in which you created the document, if the program has that feature. Using N up, you can print multiple pages of a document (at reduced size) on a single-sheet of paper. ("N" represents the number of pages to print on each sheet.) See your program's documentation for help using this feature. EN 4 Printing 103