HP 3100 HP LaserJet 3100 - Product User's Guide, C3948-90970 - Page 121

Features available only through the software The following copying features are only available when copying using the Document Assistant. q Copying two or four pages on a single sheet (2 up or 4 up). q Collating large jobs that don't fit into the HP LaserJet 3100 product's memory. If you have an item you want to copy but it is difficult to read, scan it into the JetSuite ProDesktop first. Clean up the image and then print. Hints and help In this section, find suggestions and answers to commonly asked questions. See chapter 9, "Troubleshooting and Maintenance," for a more complete list of common copy quality and usage solutions. What if... I want to use more than one of the HP LaserJet 3100 product functions at the same time? This product is specifically designed to allow you to do many tasks simultaneously, such as print while sending a fax. Jobs also queue and wait until another job finishes. For example, if a fax is being received while you are printing, the fax is stored in memory and then prints automatically after the print job finishes. Or, if an incoming fax is being printed, you can start sending an outgoing fax. The outgoing fax is stored in memory and starts transmitting when the phone line is available. Only in rare instances will the HP LaserJet 3100 product run out of memory and cancel one job so it can complete another. See "Simultaneous tasking features" in appendix A for a complete list of which features can be used at the same time. Copies are too light or too dark? Adjust the contrast before copying. A paper jam occurs while copies are printing? Once you have removed the jam, the HP LaserJet 3100 product, in most cases, reprints the jammed page and finishes the rest of the job. Once your copy job has finished printing, check to make sure all pages printed. 120 5 Copying EN