HP 3100 HP LaserJet 3100 - Product User's Guide, C3948-90970 - Page 90

Note Hint Using remote retrieval If you are away from your HP LaserJet 3100 product but would like to retrieve your faxes, you can have them sent to a fax machine at your present location. To use this feature, your HP LaserJet 3100 product must be the one receiving faxes (not the computer) and must be set to Automatic mode. There are two parts to this procedure: setting up before you leave and then retrieving the faxes once you arrive at the remote location. If faxes are normally received to memory (not printed), then you do not need to do the setup procedure. If this is the first time you have used remote retrieval, you must enable the feature and set a password. See "Enabling remote retrieval and setting a password" in chapter 8. To set up before leaving 1 If faxes normally are received to memory, you do not need this procedure. - Or If faxes normally print, go to the next step. 2 Press ENTER/MENU. 3 Use the < and > keys to select Fax Settings and press ENTER/MENU. 4 Use the < and > keys to select Incoming Faxes and press ENTER/MENU. 5 Use the < and > keys to select Memory Receive and press ENTER/MENU. 6 Use the < and > keys to select Yes and press ENTER/MENU. 7 Press STOP/CLEAR to exit the Menu settings. You can have the HP LaserJet 3100 product notify your pager when faxes arrive and then retrieve them while at a remote location. If you want to do this, see "Using pager notification" in this chapter to enable that feature before you leave. EN 3 Faxing 89