HP 3100 HP LaserJet 3100 - Product User's Guide, C3948-90970 - Page 68
then send the copy through the scanner., If you have access to a full-size copier - troubleshooting
UPC - 886111573592
View all HP 3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
When scanning, you need to protect small, fragile, lightweight (less than 12 lb, or 46 g/m2), or irregularly sized items such as receipts, newspaper clippings, photographs or old or worn documents. To do so, HP recommends that you do one of the following: q Place the item in a carrier sheet. You can buy a carrier sheet, or you can make one by taping a transparency and piece of paper together along one of the short sides. Insert the item to be faxed, copied, or scanned into the carrier, and insert the carrier into the document feeder tray, taped edge first. q Using clear tape, tape the leading and trailing edges of the item to a sheet of letter- or A4-size paper. If the item is not square or rectangular, tape all edges of the item to the paper. q If you have access to a full-size copier, copy the item first and then send the copy through the scanner. When sending items in a carrier sheet, you need to move the special media lever to the right and feed only one carrier sheet at a time. See "To load thick items" in this chapter. If you have a problem with the HP LaserJet 3100 product, see chapter 9, "Troubleshooting and Maintenance." EN 3 Faxing 67