HP 3100 HP LaserJet 3100 - Product User's Guide, C3948-90970 - Page 94

Features available only through the software All PC fax functions, settings, and tasks are controlled or performed through the software. See the online help for more information. Hints and help In this section, find answers to commonly asked questions and suggestions for getting the most out of your HP LaserJet 3100 product. See chapter 9, "Troubleshooting and Maintenance," for a more complete list of common fax quality and usage problems and solutions. What If... I want to use more than one of the HP LaserJet 3100 product functions at the same time? This product is specifically designed to allow you to do many tasks simultaneously, such as print while sending a fax. Jobs also queue and wait until another job finishes. For example, if a fax is being received while you are printing, the fax is stored in memory and then prints automatically after the print job finishes. Or, if an incoming fax is being printed, you can start sending an outgoing fax. The outgoing fax is stored in memory and starts transmitting when the phone line is available. Only in rare instances will the HP LaserJet 3100 product run out of memory and cancel one job so it can complete another. See "Simultaneous tasking features" in appendix A for a complete list of which features can be used at the same time. A fax comes while I'm printing and the HP LaserJet 3100 product is set to print faxes? When a fax is received during a print job, the fax is stored in memory and printed after the print job finishes. In the rare instance that the HP LaserJet 3100 product runs out of memory while receiving the fax, it terminates the print job and prints the incoming fax. EN 3 Faxing 93