Brother International WP1700MDS Owners Manual - English - Page 155
Drawing, Frame, Printing, Deleting, Lines
View all Brother International WP1700MDS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Drawing the Frame 1. While in MOVE mode, move the cursor to the starting point of a vertical or horizontal line. 2. Use _°• to switch to the ADD mode. 3. Move the cursor to draw the line and stop when you arrive at the desired end of the line. For a horizontal line, you may use lir4-FiT13 to toggle between a single and double line. 4. Use E to switch to the MOVE mode and repeat steps (1) to (3) to draw all the lines you want in your frame. NOTE: To delete a line, switch to the MOVE mode, position the cursor on the line to be deleted, then switch to the DEL mode and move the cursor along the line. Switch back to the MOVE mode when the line is deleted. Printing the Frame CODE NOTE: In order to print the frame properly, you must insert an International or Symbol daisy wheel to print vertical and double horizontal lines. The keyboard should be set to KB:II or KEIII to match the daisy wheel. ALL DELETE 1. Press MENU to display the menu. 2. Use 0 and Q to select PRINT, and press RETURN • Accelerator: Instead of (2), type "P". • Short cut: Instead of steps (1) and (2), press DE 3. Follow the instructions given in the message line. Deleting All Lines (a). CODE D PRINT a 1. Press MENU to display the menu. 2. Use (7) and to select ALL DELETE, and press fillTurTN1. The following message appears: 145