Brother International WP1700MDS Owners Manual - English - Page 287

Error Messages Please consult the following table when an error message appears. Message Cause Remedy Memory full . You attempted an operation that would require more memory than the total limit of 32 kilobytes. Delete some parts of the text using .i. , failiW9, , (COCC + ti , or the block delete function. You may also try to copy a smaller block. Unidentified disk error. Insert another and press RETURN. Defective diskette. You attempted to copy an uninitialized source diskette. Consult your dealer. Initialize the diskette. (This will erase any files previously stored on the diskette.) Insert disk and press RETURN. Incorrect disk. Insert another and press RETURN. The diskette is not inserted when you start a read operation, or the diskette is removed during read or write operation (a message was telling you to wait). The selected file cannot be found on the inserted diskette (you changed the diskette so that the INDEX screen and the inserted diskette do not match). Insert the diskette and press U . In future, please avoid removing or inserting a diskette while prompted to wait. Press L,e, a≥ or rein- sert the correct diskette and press F-417732:1 . Disk is write protected. You are using a write- Release the protection and press RETURN to retry. protected diskette. Use another diskette or disengage the write protection. Check printer. - Malfunction of the printer Consult your dealer. mechanism. Check disk. Malfunction of the disk Consult your dealer. drive. 277