Cisco IPS-4255-K9 Installation Guide - Page 106
Dimensions and Weight, Power, Environment, Nonoperating -40°F to 158°F -40°C to 70°C
UPC - 746320951096
View all Cisco IPS-4255-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Specifications Chapter 4 Installing the IPS 4270-20 Specifications Table 4-5 lists the specifications for the IPS 4270-20. Table 4-5 IPS 4270-20 Specifications Dimensions and Weight Height 6.94 in. (17.6 cm) Width 19.0 in. (46.3 cm) Depth 26.5 in. (67.3 cm) Weight 80 lb (36.3 kg) Form factor 4 RU, standard 19-inch rack-mountable Power Rated input voltage 100 to 127 VAC 200 to 240 VAC Rated input frequency 50 to 60 Hz Rated input power 1161W @ 100 VAC 1598W @ 200 VAC Rated input current 12A (100 VAC) 8A (200 VAC) Maximum heat dissipation 3960 BTU/hr (100 VAC) 5450 BTU/hr (200 VAC) Power supply output 910 W (low line) 1300 W (high line) Environment Temperature Operating 50 to 95°F (10 to 35°C)1 Nonoperating -40°F to 158°F (-40°C to 70°C) Maximum wet bulb temperature 82.4°F (28°C) Relative humidity (noncondensing) Operating 10% to 90% Nonoperating 5% to 95% Altitude Operating 0 to 10,000 ft (3050 m) Nonoperating 0 to 30,000 ft (9144 m) Shock Operating Half-sine 2 G, 11 ms pulse, 100 pulses Nonoperating 25 G, 170 inches/sec delta V Vibration 2.2 Grms, 10 minutes per axis on all three axes 1. At sea level with an altitude derating of 1.8°F per every 1000 ft (1.0°C per every 3.0m) above sea level to a maximum of 10,000 ft (3050 m). no direct sustained sunlight. 4-14 Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0 OL-18504-01