Cisco IPS-4255-K9 Installation Guide - Page 366

Gathering Information Chapter A Troubleshooting Link Status = Up Link Speed = Auto_1000 Link Duplex = Auto_Full Total Packets Received = 0 Total Bytes Received = 0 Total Multicast Packets Received = 0 Total Broadcast Packets Received = 0 Total Jumbo Packets Received = 0 Total Undersize Packets Received = 0 Total Receive Errors = 0 Total Receive FIFO Overruns = 0 Total Packets Transmitted = 0 Total Bytes Transmitted = 0 Total Multicast Packets Transmitted = 0 Total Broadcast Packets Transmitted = 0 Total Jumbo Packets Transmitted = 0 Total Undersize Packets Transmitted = 0 Total Transmit Errors = 0 Total Transmit FIFO Overruns = 0 MAC statistics from interface GigabitEthernet0/0 Media Type = TX Link Status = Up Link Speed = Auto_100 Link Duplex = Auto_Full Total Packets Received = 2211296 Total Bytes Received = 157577635 Total Multicast Packets Received = 20 Total Receive Errors = 0 Total Receive FIFO Overruns = 0 Total Packets Transmitted = 239723 Total Bytes Transmitted = 107213390 Total Transmit Errors = 0 Total Transmit FIFO Overruns = 0 sensor# Events Information You can use the show events command to view the alerts generated by SensorApp and errors generated by an application. This section describes the show events command, and contains the following topics: • Sensor Events, page A-88 • Understanding the show events Command, page A-89 • Displaying Events, page A-89 • Clearing Events, page A-92 Sensor Events Events remain in the Event Store until they are overwritten by newer events. There are five types of events: • evAlert-Intrusion detection alerts • evError-Application errors • evStatus-Status changes, such as an IP log being created A-88 Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0 OL-18504-01