Cisco IPS-4255-K9 Installation Guide - Page 135

Chapter 4 Installing the IPS 4270-20 Installing and Removing Interface Cards Step 8 To unlock the expansion card slot, push down on the center part of the blue tab and open the latch. PS2 UID PCI-E x4 9 8 PCI-E x8 7 PCI-E x4 6 PCI-E x8 5 4 PCI-E x4 3 P 250204 Step 9 To uninstall a card, lift the card out of the socket. To install a card, position the card so that its connector lines up over the socket on the mother board and push the card down in to the socket. Press down on the outer edge of the blue tab to lock the card in to place. Note To remove full-length expansion cards, unlock the retaining clip. To install full-length expansion cards, lock the retaining clip. Step 10 Step 11 Step 12 Step 13 Replace the chassis cover. Slide the server back in to the rack by pressing the server rail-release handles. Reconnect the power cables to the IPS 4270-20. Power on the IPS 4270-20. OL-18504-01 Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0 4-43