Cisco IPS-4255-K9 Installation Guide - Page 204
Step 7, Step 8, Step 9, Step 10, Step 11
UPC - 746320951096
View all Cisco IPS-4255-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Advanced Setup Chapter 10 Initializing the Sensor [2] Save this configuration and exit setup. Enter your selection[2]: Step 7 If you receive the warning that Analysis Engine is initializing, enter 2 to save your configuration thus far and exit setup. You can then reenter setup and press Enter until you are back to the interface and virtual sensor menu. Enter 2 to modify the virtual sensor configuration. Modify interface/virtual sensor configuration?[no]: yes Current interface configuration Command control: Management0/0 Unassigned: Monitored: GigabitEthernet0/1 Virtual Sensor: vs0 Anomaly Detection: ad0 Event Action Rules: rules0 Signature Definitions: sig0 [1] Edit Interface Configuration [2] Edit Virtual Sensor Configuration [3] Display configuration Option: Step 8 Enter 2 to edit the virtual sensor vs0 configuration. Virtual Sensor: vs0 Anomaly Detection: ad0 Event Action Rules: rules0 Signature Definitions: sig0 No Interfaces to remove. Unassigned: Monitored: [1] GigabitEthernet0/1 Add Interface: Step 9 Enter 1 to add GigabitEthernet0/1 to virtual sensor vs0. Add Interface: 1 Virtual Sensor: vs0 Anomaly Detection: ad0 Event Action Rules: rules0 Signature Definitions: sig0 Monitored: GigabitEthernet0/1 [1] Edit Interface Configuration [2] Edit Virtual Sensor Configuration [3] Display configuration Option: Step 10 Press Enter to exit the interface and virtual sensor configuration menu. Modify default threat prevention settings?[no]: Step 11 Enter yes if you want to modify the default threat prevention settings. 10-14 Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0 OL-18504-01