Cisco IPS-4255-K9 Installation Guide - Page 96
The 10GE interface card part numbers IPS-2X10GE-SR-INT and IPS-2X10GE-SR-INT= provides two,
UPC - 746320951096
View all Cisco IPS-4255-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Supported Interface Cards Figure 4-2 shows the 4GE bypass interface card. Figure 4-2 4GE Bypass Interface Card Chapter 4 Installing the IPS 4270-20 153325 190474 2SX Interface Card The 2SX interface card (part numbers IPS-2SX-INT and IPS-2SX-INT=) provides two 1000BASE-SX (fiber) monitoring interfaces. The IPS 4270-20 supports up to six 2SX interface cards for a total of twelve SX interfaces. The 2SX card ports require a multi-mode fiber cable with an LC connector to connect to the SX interface of the sensor. The 2SX interface card does not support hardware bypass. Figure 4-3 shows the 2SX interface card. Figure 4-3 2SX Interface Card 10GE Interface Card The 10GE interface card (part numbers IPS-2X10GE-SR-INT and IPS-2X10GE-SR-INT=) provides two 10000 Base-SX (fiber) interfaces. The IPS 4270-20 supports up to two 10GE interface cards for a total of four 10GE fiber interfaces. The card ports require a multi-mode fiber cable with an LC connector to connect to the SX interface of the IPS 4270-20. The 10GE interface card does not support hardware bypass. Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0 4-4 OL-18504-01