Cisco IPS-4255-K9 Installation Guide - Page 212

Advanced Setup Chapter 10 Initializing the Sensor Subinterface Number: 9 Description[Created via setup by user asmith]: Vlans[]: d. Enter 1-100 to assign VLANs 1-100 to subinterface 9. Note This removes VLANs 1-100 from the unassigned VLANs contained in subinterface 10. e. Repeat Steps c and d until you have added all VLAN groups. f. Press Enter at a blank subinterface line to return to list of interfaces available for VLAN groups. [1] GigabitEthernet0/7 [2] GigabitEthernet0/8 Option: Step 10 Press Enter to return to the top-level interface configuration menu. [1] Remove interface configurations. [2] Add/Modify Inline Vlan Pairs. [3] Add/Modify Promiscuous Vlan Groups. [4] Add/Modify Inline Interface Pairs. [5] Modify interface default-vlan. Option: Step 11 Press Enter to return to the top-level menu. [1] Edit Interface Configuration [2] Edit Virtual Sensor Configuration [3] Display configuration Option: Step 12 Enter 2 to edit the virtual sensor configuration. [1] Remove vs [2] Modify "vs0" [3] Create new vs Option: Step 13 Enter 2 to modify the virtual sensor vs0 configuration. Virtual Sensor: vs0 Anomaly Detection: ad0 Event Action Rules: rules0 Signature Definitions: sig0 No Interfaces to remove. Unassigned: Promiscuous: [1] GigabitEthernet0/7 Step 14 Enter 2 to add VLAN group GigabitEthernet0/8:10 to the virtual sensor vs0. Promiscuous Vlan Groups: [2] GigabitEthernet0/8:10 (Vlans: unassigned) [3] GigabitEthernet0/8:9 (Vlans: 1-100) Add Interface: Step 15 Press Enter to return to the top-level virtual sensor configuration menu. Virtual Sensor: vs0 Anomaly Detection: ad0 Event Action Rules: rules0 10-22 Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0 OL-18504-01