Cisco IPS-4255-K9 Installation Guide - Page 76

Front and Back Panel Features Chapter 3 Installing the IPS 4260 Figure 3-6 shows the two built-in Ethernet ports, which have two indicators per port. Figure 3-6 Ethernet Port Indicators SPD indicator Link/ACT indicator 6 5 4 153308 CONSOLE SPD LNK SPD LNK GE 0/1 MGMT SPD indicator "SPD" Link/ACT indicator "LINK" Table 3-2 lists the back panel indicators. Table 3-2 Back Panel Indicators Indicator Left side Right side Color Green solid Green blinking Not lit Green Amber Diagnostic System ID indicators indicator (for TAC use) Description Physical link Network activity 10 Mbps 100 Mbps 1000 Mbps Status indicator Table 3-3 lists the power supply indicator. Table 3-3 Power Supply Indicators Color Off Green solid Green blinking Amber Amber blinking Description No AC power to all power supplies. Output on and ok. AC present, only 5Vsb on (power supply off). No AC power to this power supply (for 1+1 configuration) or power supply critical event causing a shutdown: failure, fuse blown (1+1 only), OCP 12 V, OVP 12 V, or fan failed. Power supply warning events where the power supply continues to operate: high temperature, high power/high current, or slow fan. Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0 3-8 OL-18504-01