Cisco IPS-4255-K9 Installation Guide - Page 255
Step 3, Ctrl-R
UPC - 746320951096
View all Cisco IPS-4255-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
Chapter 12 Upgrading, Downgrading, and Installing System Images Installing System Images Step 3 Press Ctrl-R at the following prompt while the system is booting. Evaluating Run Options... Note You have five seconds to press Ctrl-R. Assuming IPS 4260-K9 Platform 2 Ethernet Interfaces detected Cisco Systems ROMMON Version (1.0(11)1c) #26: Mon Mar 13 18:05:54 CST 2006 Platform IPS 4260-K9 Management0/0 Link is UP MAC Address: 0004.23cc.6047 Step 4 Use ? for help. rommon #0> If necessary, change the port used for the TFTP download. rommon #1> interface name The port in use is listed just after the platform identification. In the example, port Management0/0 is being used. Note The default port used for TFTP downloads is Management0/0, which corresponds with the command and control (MGMT) interface of the IPS 4260. Note Ports Management0/0 (MGMT) and GigabitEthernet0/1 (GE 0/1) are labeled on the back of the chassis. Step 5 Specify an IP address for the local port on the IPS 4260. rommon> address ip_address Note Use the same IP address that is assigned to the IPS 4260. Step 6 Step 7 Step 8 Step 9 Specify the TFTP server IP address. rommon> server ip_address Specify the gateway IP address. rommon> gateway ip_address Verify that you have access to the TFTP server by pinging it from the local Ethernet port. rommon> ping server_ip_address rommon> ping server Specify the path and filename on the TFTP file server from which you are downloading the image. rommon> file path/filename OL-18504-01 Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0 12-19