Brother International PEDESIGN 7.0 Users Manual - English - Page 163
Programmable fill stitch
View all Brother International PEDESIGN 7.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Arranging Embroidery Designs (Layout & Editing) Step Pitch Sets the pitch of the stitching. Range: 1.0-10.0 mm (0.04-0.39 inch) Default: 4.0 mm (0.16 inch) Step pitch: Frequency Sets the spacial frequency steps. Range: 0-99% Default: 30% 30% 0% Pull Compensation Lengthens the sewing region in the stitch pattern's sewing direction to prevent pattern shrinkage during sewing. Range: 0.0-2.0 mm (0.00-0.08 inch) Default: 0.0 mm (0.00 inch) Programmable fill stitch Under sewing Sets under lay stitching on or off. Use under lay stitching in order to prevent shrinking during stitching. On: Under lay stitching will be sewn. Off: Under lay stitching will not be sewn. Default: Off [Type] Specifies the type of under lay stitching sewn. With text and manual punching patterns Edge: Zigzag: All: Edge: The stitching sewn under the edge of the pattern. Zigzag: Zigzag stitching is sewn under the areas of the pattern. All: Stitching is sewn under the edge and areas of the pattern. With other patterns Single: Sews perpendicular to the specified sewing direction. Single: Double: Double: Sews a pattern with 45° and - 45° angle to the specified sewing direction. Density Sets the number of lines per millimeter. Range: 1.0-7.0 lines per mm (25-178 lines per inch) Default: 4.5 lines per mm (114 lines per inch) Gradation Sets the density gradation setting on or off. This setting can be specified for patterns other than manual punching patterns. Available when the type of sewing direction is set to Constant. Click Pattern to set the gradation pattern and its density. Default: Off For details on this attribute, refer to"Creating a gradation" on page 162. Direction [Type] Specifies the type of sewing direction. This setting can be specified for patterns other than manual punching patterns. Constant: Sews at a fixed angle. The angle is specified by the angle setting. Variable: Varies the sewing direction according to the object being sewn. [Angle] Specifies the sewing angle. 135° 90° 45° Available only when the sewing direction type is set to Constant. 180° 0° Range: 0-359 degrees Default: 45 degrees 225° 315° 270° Half Stitch Sets half stitching on or off. Available for text, manual punching patterns, and for geo- On: metric shapes when the type of sewing direction is set to Variable. If one side of the fill stitching is dense, a half stitch could be Off: sewn automatically to provide a more even density. Default: Off Running Stitch Path Sets the running path of the stitching. Available when the type of sewing direction is set to Constant. Available settings: • Inside of region (shortest route) • Along outline (along the inner side) • Onto outline (on the outline) The inside of region setting is available only when the Gradation check box is cleared. Default: Inside of region Inside of region: Along outline: Onto outline: 157