Brother International PEDESIGN 7.0 Users Manual - English - Page 94

Automatically Converting an Image to an Embroidery Pattern (Layout & Editing/Image to Stitch Wizard) 3. In the Select Mask dialog box, click Next. → The image is analyzed, and the Check Mask Shape dialog box appears. b Memo: Areas not set to be sewn are shown filled with a crosshatch pattern. 4. Click Next. → The Photo Stitch 2 Parameters dialog box appears. 5. Specify the settings for creating the embroidery pattern. b Memo: • To return to the previous dialog box, click Previous. • To quit the operation and close the dialog box, click Cancel. Sewing Option Line interval Specifies the interval between parallel lines used to create the embroidery pattern. Range: 1.2 to 5.0 mm (0.05 to 0.2 inch) Default: 2.0 mm (0.08 inch) Line interval Max. Density Specifies the maximum density for areas of the created embroidery pattern sewn with the zigzag stitch. The embroidery pattern will be created with a density smaller than that set here. Range: 2.5 to 5.0 lines per mm (64 to 127 lines per inch) Default: 3.0 lines per mm (76 lines per inch) Thread Color Setting You can select the brand of thread you want to use with the Color Set function. Thread Chart The colors will be selected automatically correspond with the Color Set selection. A user thread chart can also be selected. Color Set If Auto Select is selected, the most appropriate four colors will automatically be selected. Selecting a different option specifies the four colors used when creating the embroidery pattern. The color choices are: cyan (C), magenta (M), yellow (Y), black (K), red (R), green (G) and blue (B). Select one of the following combinations that contains the colors most used in the image. Color combinations: CMYK, RGBK, CRYK, BMYK Thread Colors Used Change Color Displays the four selected thread colors. In Thread Colors Used click on the color you want to change. Then click on Change Color to open the Thread Color dialog box. Select the new color and click ok. You will see the color change within the photo in the preview box within the Photo Stitch 2 Parameters dialog. Brightness / Contrast Update Preview The top slider is used to adjust the brightness. Move the slider to the right to increase the brightness or to the left to decrease the brightness. The bottom slider is used to adjust the contrast. Move the slider to the right to increase the contrast or to the left to decrease the contrast. Click on Update Preview to see the changes made. Click this button to update the previewed image after settings have been changed. 88